- Detail
- Parameters
- Review
CDZs-D1 N2 Charging Vehicle(N2 Pressurization)
Application:
CDZs—D1 Mini Nitrogen Charging Vehicle works as a special N2 supercharging device and charging device of hydraulic bag accumulator, piston accumulator,diaphragm accumulator andother high—pressure vessel of NXQ series.Max N2 pressure is 42MPa.
Ordering model:
Working pinciple:
The Nitrogen Charging Vehicle consists of hydraulic system.gas system and electric system The pressure fluid flows into the pressure cylinder through solenoid directional valve to push the piston move upward(downward)to pressurize the N2 in the pressure cylinder and then flow into the accumulator(or high—pressure Vessel)through holding valve and charging tool.N2 is pressurized to the operating pressure by the reciprocating movement of piston under the effect of limit switch.After that turned off itself.
Technical data:
| Model | Pin (Mpa) | Max Pin (Mpa) | Pump | Volume (L) | Power | Weight (kg) | |
Pressure (Mpa) | Flux (L) | ||||||
| CDZs-25D1-1.6L | 3~13.5 | 25 | 31.5 | 3.75 | 1.6 | 3P 380V 50Hz | 240 |
| CDZs-25D1-2.5L | 7.5 | 2.5 | 245 | ||||
| CDZs-25D1-4.0L | 15 | 4 | 300 | ||||
| CDZs-35D1-1.6L | 35 | 50 | 2.68 | 1.6 | 240 | ||
| CDZs-35D1-2.5L | 5.37 | 2.5 | 245 | ||||
| CDZs-35D1-4.0L | 10.74 | 4 | 300 | ||||
Available model:
CDZs-25D1-1.6L CDZs-25D1-2.5L CDZs-25D1-4.0L CDZs-35D1-1.6L CDZs-35D1-2.5L CDZs-35D1-4.0L
