- Detail
- Parameters
- Review
VPA series pneumatic pulse valve
Introduction:
VPA series pneumatic control pulse valve is the "switch" of compressed air in the injection and dust cleaning system of pulse bag dust collector. It is suitable for the connection between air storage cylinder and dust collector injection pipe. It is controlled by pneumatic signal to spray dust on filter bag.
Features:
1.The diaphragm is made of special rubber imported from Germany, with high pressure resistance and long service life.
2.The valve body and bonnet adopt die-casting process and surface electrophoresis treatment, with good anti-corrosion performance,compact structure and easy installation.
3.The internal flow channel of the valve body is optimized for large exhaust volume and rapid exhaust. The filter can be cleaned and the objects or workpieces can be blown away.
Specification:
| DN（mm） | 20 | 25 | 40 | 50 | 62 | 76 |
| working medium | filter compressed ai | |||||
| voltage | DC24V AC110V AC220V | |||||
| thread | G3/4 | G1 | G1 1/2 | G2 | G21/2 | G3 |
| Cv | 17 | 25 | 55 | 90 | 110 | 243 |
| installation torque(N • M) | ≤60 | ≤200 | ≤240 | ≤300 | ≤350 | / |
| working pressure | 0. 035-0. 8MPa | |||||
| reversing time | ≤30ms | |||||
| protection class | IP65 | |||||
| ambient temperature | - 40~+80℃ | |||||
| Durability (ten thousand times) | 150 or three years | |||||
Model code:
1.serial number: pulse valve
2.control mode: pneumatic control
3.interface form: 1=right angle;2=right angle with nut;3=embedded;4=straight through
4.diameter:20,25,40,50,62,76mm
5.structure form: S=double diaphragm (above 40);no mark=single diaphragm
Available model:
VPA120S VPA125S VPA140S VPA150S VPA162S VPA176S
VPA220S VPA225S VPA240S VPA250S VPA262S VPA276S
VPA320S VPA325S VPA340S VPA350S VPA362S VPA376S
VPA420S VPA425S VPA440S VPA450S VPA462S VPA476S
VPA120 VPA125 VPA140 VPA150 VPA162 VPA176
VPA220 VPA225 VPA240 VPA250 VPA262 VPA276
VPA320 VPA325 VPA340 VPA350 VPA362 VPA376
VPA420 VPA425 VPA440 VPA450 VPA462 VPA476
