Pulse controller introduction:
Pulse controller is the main control device of pulse bag dust collector. Its output signal controls the compressed air in the solenoid pulse valve to circulate and clean the filter bag, so as to keep the resistance of the dust collector within the set range, and ensure the processing capacity and dust collection efficiency of the dust collector.
The pulse interval, pulse width, output bit output number and pulse cycle interval of the product are adjustable. The data can be displayed by digital display tube. The output bit can be expanded according to demand. It has two control modes: timing control and differential pressure control.
Advantages:
stable function, high reliability, low power consumption, simple operation.
Voltage:1-DC24V;2-AC220V
Available model:
DMK-J1S-10X DMK-J2S-10X
DMK-J1S-10XY DMK-J2S-10XY
Technical parameter:
power consumption | ≤8W (pulse width and interval within rated range) | |
Rated input voltage | AC220V | |
Rated output voltage | DC24V AC220V | |
rated output current | 1A | |
differential pressure control performance | output bits 1-52 points adjustable | |
output pulse interval | l-99sec | |
output pulse width | 30-999ms | |
control pulse valve No. | 10-52 | |
pulse cycle interval | 1-99sec | |
parameter setting method | manual | remote control |
note: working environment: the relative humidity of the air shall not exceed 85%, no serious corrosive gas and conductive dust, no violent vibration or impact, and the ambient temperature shall be - 25°C to + 55°C.