Section Mill
Introduction:
Section mills are primarily used to milling sections in the casing (for side tracking, gravel packing) and perforation zones. The section mill is available in a variety of Casing sizes, ranging from 4 1/2" to 13 3/8". The blades are all dressed to enable simultaneously milling of the casing. The milling rate is usually limited by the ability of the fluid in removing the cuttings.
When ordering please specify:
●Tool model
●Size and weight of Casing to be milled
●Top connection
Available model:
DXG114 DXG127 DXG140 DXG168 DXG178 DXG194 DXG219 DXG245 DXG273 DXG298 DXG340
Section mill technical parameters:
No. | Model | Casing Size (in) | Body O.D (in) | Fishing Neck O.D (in) |
1 | DXG114 | 4 1/2 | 3 3/4 | 2-3/8 REG |
2 | DXG127 | 5 | 4 1/8 | 2-7/8 REG |
3 | DXG140 | 5 1/2 | 4 1/2 | 2-7/8 REG |
4 | DXG168 | 6 5/8 | 5 1/2 | 3-1/2 REG |
5 | DXG178 | 7 | 6 | 3-1/2 REG |
6 | DXG194 | 7 5/8 | 6 1/2 | 3-1/2 REG |
7 | DXG219 | 8 5/8 | 7 3/8 | 4-1/2 REG |
8 | DXG245 | 9 5/8 | 8 1/4 | 4-1/2 REG |
9 | DXG273 | 10 3/4 | 9 1/4 | 6-5/8 REG |
10 | DXG298 | 11 3/4 | 10 | 6-5/8 REG |
11 | DXG340 | 13 3/8 | 11 1/2 | 6-5/8 REG |