K25JD series 2 position 5 way electric control stop valve
Introduction:
This series of valves are monostable stop reversing elements, which are composed of normally closed solenoid pilot valve and main valve.It is especially suitable for occasions with bad environmental conditions such as steel and casting.
Features:
few sliding mating surfaces, simple structure, strong dust resistance, low requirements for air source purification, lubrication and environmental conditions.
Models:
K25JD-6 K25JD-8 K25JD-10 K25JD-15
Technical data:
model | K25JD-6 | K25JD-8 | K25JD-10 | K25JD-15 |
working medium | compressed air | |||
working pressure(MPa) | 0. 2~0. 8 | |||
voltage(V) | AC:220;36 DC: 24;12 | |||
reversing time≤(S) | 0.08 | |||
reversing frequency≥(Hz) | 6 | |||
effective area≥(mm2) | 10 | 20 | 40 | 60 |
DN(mm) | 2 | |||
leakage(cm3/min) | ≤ 100 | |||
ambient temperature(℃) | 5~50 | |||
durability (ten thousand times) | 150 |
Overall and dimension:
model | K25JD-6 | K25JD-8 | K25JD-10 | K25JD-15 |
Ma | G1/8 | G1/4 | G3/8 | G1/2 |
L | 102 | 138 | ||
L1 | 90 | 112 | ||
L2 | 28 | 38 | ||
D | 75 | 108 | ||
C | 7 | 9 | ||
H | 145 | 162 | ||
H1 | 14 | 19 | ||
H2 | 6 | 10 |